Workshop folding machine 2,04 ml - steel 1,5 mm

Guide rail for roller shear CCM, for floding machine PBS2040-15

Guiding rail, reference RGS2040A for workshop manual folding machine PBS2040-15. Hinged device at the front of the folding machine intended to use the CCM roller shear for the scribe cuts of material before folding

CCM roller shear

Roller shear, reference CCM, 0.8mm zinc capacity, for material cuts. Roller shear used on a guiding rail only

Beading accessory with a 14 or 16-mm Ø stick, length 2m, for PBS2040 (Ø to be specified at the order)

Geared-down beading accessory with 14 or 16mm Ø stick, reference ABH14-16-2040BS, 0.65 or 0.80mm zinc capacity acc. models. Gear reduction system to make very regular beads without effort. Used with the manual folding machine PBS2040-15. NB: stick Ø choice to signal at the order

Beading accessory with a 18-mm Ø stick, length 2m, for PBS2040

Geared-down beading accessory with 18mm Ø stick, reference ABH18-2040BS, 0.80mm zinc capacity. Gear reduction system to make very regular beads without effort. Used with the manual folding machine PBS2040-15

Adaptable working bench 2 m, for folding machine PBS2040-15

Zinc workbench, reference ETB2040, suitable for folding machine PBS2040-15. Workbench with incorporated setting tools used for metal sheet scribing as well as for racks on 3 storage levels (roller shear ref.CCMA optional)

Set of two back gauges with ways from 25 up to 500 mm

Set of 2 sliding back gauge arms type GAS, reference PBS-GAS, adjustable from 25 to 500mm

Rack operated back gauge, stroke 500 mm, for folding machines PZA-PBS-PZS

Rack-operated back gauge type GAC, reference GAC-PZA-PBS-PZS, for folding machines PZS/PBS/PZA, operated by side wheel and equipped with a digital position counter

Stick length 2m, Ø 14mm for ABH2040 and ABAL2040

Extra 14mm Ø stick, reference BAH14-2040, for geared-down beading accessory ABH14-16-2040 and ABAL2040. Used for the folding machines models PCA2040, PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

Stick length 2m, Ø 16mm, for ABH2040 and ABAL2040

Extra 16mm Ø stick, reference BAH16-2040, for geared-down beading accessory ABH14-16-2040 and ABAL2040. Used for the folding machines models PCA2040, PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

Stick length 2m, Ø 18mm, for ABH2040 and ABAL2040

Extra 18mm Ø stick, reference BAH18-2040, for geared-down beading accessory ABH18-2040 and ABAL2040. Used for the folding machines models PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

Tool to close seams at 180° with adjustable heigth

Tool to close the seams, reference OFP-180, to make hems at 180° from a seam at 135°, 0.8mm steel capacity