Workshop folding machine 2m, clamping-loosening foot pedal, lateral lever, 15mm narrow tool

Guide rail for roller shear CCMA, for folding machine PZX2040

Guiding rail, reference RZX2040MA, for workshop manual folding machine PZX2040. Hinged device at the front of the folding machine intended to use the CCMA roller shear for the scribe cuts of material before folding

CCMA roller shear - cutting capacity zinc 0.8 mm, aluminium 0.8 mm, steel 0.63 mm

Roller shear, reference CCMA, 0.8mm zinc capacity, 0.7mm steel capacity, to cut the material on manual folding machines. Roller shear to be used on a guiding rail only

Tool to close seams at 180° with adjustable heigth

Tool to close the seams, reference OFP-180, to make hems at 180° from a seam at 135°, 0.8mm steel capacity

Roller offsetting tool on CCMA guide rail

Roller offsetting tool, reference OSRA, for use on the guide rails of Jouanel Industrie folding machines. For ribbing flat sheet metal, with or without hollow joints, to create underside cladding, cladding profiles, dormer cheeks or to reinforce the rigidity of sheet metal, steel capacity 0.8mm

Beading accessory with a 14, 16 or 18-mm Ø stick, length 2m (Ø to be specified at the order)

3-position aluminium geared-down beading accessory with 14, 16 or 18mm Ø stick (Ø to specify at the order), reference ABAL2040, 0.65mm zinc capacity for a 14mm Ø stick and 0.80mm for a 16 and 18mm Ø stick. Gear reduction system to make very regular beads without effort. Used with the manual folding machine PCX2040A, PCA2040 and PZX2040

Stick length 2m, Ø 14mm for ABH2040 and ABAL2040

Extra 14mm Ø stick, reference BAH14-2040, for geared-down beading accessory ABAL2040. Used for PCA, PCX, PZX and PVX folding machines in 2-meter lengths

Stick length 2m, Ø 16mm, for ABH2040 and ABAL2040

Extra 16mm Ø stick, reference BAH16-2040, for geared-down beading accessory ABAL2040. Used for PCA, PCX, PZX and PVX folding machines in 2-meter lengths

Stick length 2m, Ø 18mm, for ABH2040 and ABAL2040

Extra 18mm Ø stick, reference BAH18-2040, for geared-down beading accessory ABAL2040. Used for for PCX, PZX and PVX folding machines in 2-meter lengths

Back table with orientable gauge

Back table, reference ETBX2040, for folding machine PZX2040, gauge stroke from 60 to 1000mm. Back table equipped with orientable tool over the whole length to abut the metal sheet easily acc. to the desired dimension before cutting or folding

Belt-type back gauge, stroke 750 mm for PZX2040 folding machine

Back gauge with belt, reference PZXBC2040, from 5 to 750mm for folding machine model PZX2040. Gauge with lateral control by wheel and adjustable by digital counter, equipped with 4 repositionable fingers over the length

Extra rotating back gauge finger for PVX-PZX-PVS

Extra rotating gauge finger, reference DOIGT-PVX-BC-ROT for back gauge with belt PVXBC and PZXBC. Adding one or several extra gauge fingers provides a better back holding of the metal sheet and improves its whole positioning against the gauge. Easy relocation of the gauge fingers acc. to the metal sheet format

Sliding set of 2 back gauges with ways from 40 mm up to 510 mm, for PCX2040A

Set of 2 back gauge arms with slide type X, reference PCXB2040, adjustable from 40 to 510mm, for manual folding machines PCX2040A and PZX2040. The gauge arms slide on the fixing rail at the back of the machine and are stopped in position. Possible positioning of the metal sheet as per the desired dimension as well as its back support

Extra back gauge arm, stroke 40 mm - 510 mm, for PCX1020, PCX2040A and PCX2540A

Extra back gauge arm with slide type X, reference PCXBS2-2.5, adjustable from 40 to 510mm. Adding an extra gauge arm provides a better back holding of the metal sheet on large lengths and improves positioning before cutting or folding