Universal electric folding machine 2m x 2mm

GRAF CNC, 3 axes, dynamic graphic for electric folding machines

Dynamic graphic numerical control, reference PTSL-CNC-GRAF, 3 axes, with large 17" color touch screen and electric back gauge

Bending angle correction (Springback mode) for GRAF CNC for PTS and PTL, thickness up to 1mm

Automatic angle controller, reference PTSL-CORANG-GRAF, maximum using capacity 1.0mm (option to be ordered with the numerical control)

SIEMPRO CNC, 2 axes, for electric folding machines

2-axis numerical control, reference PTSL-CNC-SIEMPRO, with 15'' color touch screen

Bending angle correction (Springback mode) for SIEMPRO CNC for PTS and PTL

Automatic angle controller, reference PTSL-CORANG-SIEMPRO, maximum using capacity 1.0mm (option to be ordered with the numerical control)

Safety light curtains at the front, quicker clamping, for electric folding machine

Safety light curtains at the front, quicker clamping, for electric folding machine, reference PTSL-SPEED-Z. This active optoelectronic safety device detects the presence of an object or person in their detection field. The light curtain offers optimal safety for the operator and thus increases the clamping speed of the clamping beam for even more productivity.

Control console on swivel arm for electric folding machine

Control console on swivel arm for electric folding machine, reference PTSL-CNC-POT. This articulated swivel arm supports the control consol and allows the operator to position the screen in front of him during the bending process. It can thus more easily follow the indications of the numerical control for the various folding operations (sheet positioning, inversions, reversals...)

Fully retractable back gauge fingers, pneumatic device, for 2m PTS/PTL

Fully retractable back gauge fingers, pneumatic device, référence PTSL-DP2. This option automatically lowers all back gauge fingers to the table level. This will allow a large sheet to be loaded from the rear without any obstacles.

Electric back gauge, 10-750 mm, for 2m electric folding machine

Electrically-operated back gauge, reference PTSL-BAE2-750, from 10 to 750mm, gauge managed by the numerical control of the folding machine. The gauge includes the back table to support large-sized metal sheets and 6 gauge fingers. NB: option to be planned with the order of the folding machine.

Electric back gauge, 10-1000 mm, for 2m electric folding machine

Electrically-operated back gauge, reference PTSL-BAE2-1000, from 10 to 1000mm, gauge managed by the numerical control of the folding machine. The gauge includes the back table to support large-sized metal sheets and 6 gauge fingers. NB: option to be planned with the order of the folding machine.

Electric back gauge, 10-1500 mm, for 2m electric folding machine

Electrically-operated back gauge, reference PTSL-BAE2-1500, from 10 to 1500mm, gauge managed by the numerical control of the folding machine. The gauge includes the back table to support large-sized metal sheets, 2 lines of 6 gauge fingers. NB: option to be planned with the order of the folding machine and require pressurized air supply.

Extra pneumatic conical folding, manual adjustement, for BAE750

Additional equipment reference PTS-BAE3-PC, for pneumatic conical folding, manual adjustment, for 750mm electrically-operated back gauge

Extra pneumatic conical folding, manual adjustement, for BAE1000

Additional equipment reference PTS-BAE3-1M-PC, for pneumatic conical folding, manual adjustment, for 1000mm electrically-operated back gauge

Control pedal on ground rail

Control pedal on ground rail, reference PTSL-PEDRAIL. The control pedal slides on a rail over the entire length of the machine. This system makes it easier to move the pedal and avoids leaving the power supply duct lying on the ground.

Special folding beam for 2m PTS with clearance, 10 and 24mm folding tools included

Special folding beam reference PTSL-TDI2, for 2m universal electric folding machine PTS with clearance. This new geometry provides more clearance for bending, making it easier to produce complex parts such as crenellations or omegas. 10 and 24mm folding tools are included. Note: this option must be specified when ordering the bending machine.

Folding beam tool, 8mm, for 2m PTS and PTL folding machines

Folding beam tool, thickness 8 mm, reference PTSL-RT8-2

Folding beam tool, 10mm, for 2m PTS and PTL folding machines

Folding beam tool, thickness 10mm, reference PTSL-RT10-2

Folding beam tool, 12mm, for 2m PTS and PTL folding machines

Folding beam tool, thickness 12mm, reference PTSL-RT12-2