Roofing and metal building envelope Light manual roofing machines

More than tools, these light manual machines are particularly suitable to meet your requirements of metal forming or slate and fiber-cement cuts on the roofing building site or in workshop. Designed and manufatcured for intensive use, our hand edge rollers, round edge arch-folding machine, slate cutter or downpipe flaring tool will give you quality pieces with gains in productivity, being essential for the profitability of your building sites.

Advanced research :


TOTAL : 18 products

New

Table gabarit pour abergements de cheminée

Chimney pattern table

Maximum working width 1320 mm - Model available with a set of 4 angle template tools or model supplied without angle template tools (optional additional equipment)

Coupe-ardoise CA600

Manual thick slate cutter CA600

For natural and artificial slates - Useful working length: 600mm / Maximum thickness: 6mm

New

Coupe-ardoise CA600E

Electric thick slate cutter CA600E

For natural and artificial slates - Useful working length: 600mm / Maximum thickness: 8mm, drill driver not included

New

Coupe-ardoise CA600E-DEW

Electric thick slate cutter CA600E-DEW

For natural and artificial slates - Useful working length: 600mm / Maximum thickness: 8mm, including DEW screwdriver kit

New

Sertisseuse légère de chantier SRLT2

Light seamer for standing seam profiles, first and second stage in one pass with base for screw gun and transport case

Light seamer reference SRLT2 for standing seam profiles, first and second fold in one pass on roofs and first fold on facades. 25, 32 and 38mm height, with base for screwdriver and stackable transport case (screwdriver not supplied)

New

Kit de motorisation DEW-VAL

DEWALT angle screwdriver with charger pack and 2 batteries, with transport case

DeWalt angle screwdriver kit, reference DEW-VAL, usable with the light seamer SRLT2 for the first fold in standing seam cladding (seamer block SRLT2 to be ordered in addition)

Light seamer for standing seam profiles, with base for screw gun and transport case

Light seamer reference SRLT12 for standing seam profiles height 25 or 32mm - 1st and 2nd fold, with base for screw gun and carrying case (screw-gun not supplied)

Kit de motorisation pour sertisseuse SRLT12

Motorization kit for cladding - 1st fold

Motorization kit with "hands-free" setting reference SRLT12-KITBARD for light seamer SRLT12. Can only be used for the 1st fold in standing seam cladding.

New

Mini plieuse à main PLIM5

Hand edge roller for drip edges 5mm

Mini hand edge roller for flange, reference PLIM5, 0.7mm steel capacity, edge height 5mm

Plieuses à main - 2 rouleaux de guidage

Single column hand edge roller PLIMSC2

2 guide rolls